Mon. Sep 26th, 2022

When counterfeit electronic elements very first began surfacing it was frequently straightforward to spot them. The markings on the chip would be blatantly wrong such as the wrong logo for the enterprise who supposedly created the solution or a marking which would just rub off. As the counterfeiters have gained sophistication, their fake elements are tougher to spot. Even checking the markings on the chip (Blacktop Markings) now needs rigorous testing procedures.

Counterfeit parts have become a substantial concern in the electronic component sector. From time to time these counterfeits are clones – attempts to copy the genuine parts. In other instances, the counterfeiters will re-mark a aspect. The counterfeiter will take a component produced for a precise goal and modify the markings on part so it will appear to be another aspect.

Why does this matter? Electronic elements are built to precise standards to perform highly specific jobs. These components then undergo rigorous testing to assure they will execute as count on below all circumstances. You would not make an airplane with untested screws that practically match. It is potentially more hazardous to use electronic elements which are just about proper.

The US military has created detailed specifications for how to test elements. These specifications have come to be the industry common, used to test each military and non-military components. The military standards are crucial in figuring out the authenticity of elements. Reputable electronic element testing firms adhere to those published specifications. Nonetheless, there are variations and proprietary approaches of how to implement those specs and keep excellent manage throughout testing.

(Note: The following test is utilized as basic instance for the purposes of this article. Some specific actions and proprietary information and facts has been omitted.)

Marking Permanency (Resistance to Solvents) Test:

The goal of a Marking Permanency test is to verify that the parts when subjected to solvents will maintain their appropriate markings. Counterfeit parts normally have new markings which are not permanent they will dissolve when the solvents are correctly applied. Also, segway es5 will reveal evidence of earlier markings which have been sanded off or otherwise replaced by the false markings.

Numerous Military Standard procedures are utilised which incorporate processes of operating with numerous chemical compounds mixed appropriately and in detail is in accordance with the specifications. These chemical substances consist of Aliphatic alcohol, mineral spirits, ethyl-benzene, organic solvents, de-ionized water, propylene glycol monomethyl either, or monoethanloamine.

When properly mixed the elements are submerged in a three phase procedure and analyzed in accordance with MIL-HBK-130 to uncover proof of damage to the device and any specified markings which are missing in entire or in aspect, faded, smeared, blurred, or shifted (dislodged) to the extent that they cannot be readily identified from a distance of at least 15.0cm (six inches) with typical space lighting and with no the help of magnification or with a viewer obtaining a magnification no greater than 3X. In some instances, a strategic acetone wash will be utilized to reveal sanding marks and facets of previous markings.


Blacktop marking is just 1 test in a multi-step approach used to uncover counterfeit electronic components. Other tests incorporate closely checking the physical dimensions and the packaging as effectively as the functionality of the chips. Counterfeit electronic elements are on the rise in each military and civilian merchandise. As the counterfeiting gets extra sophisticated, testing houses continue to develop finely tuned procedures to separate the fake goods from the actual components.

By momrelf

Leave a Reply

Your email address will not be published.